The installation method of lithium battery solar street lamps is very important. The appropriate way is to refer to the installation rules of road lighting. It also needs to be closely linked with the specific situation of the installation site, and develop an appropriate, reasonable and effective installation method of lithium battery solar street lamps. Installation workers who lack professional skills will have wrong views on installation. Next, I will explain in detail the proper way to install lithium battery solar street lamps.

1. Installation address of lithium battery solar street lamp

Lithium battery solar street lamps and solar garden lamps are the most important to receive the best spotlight, so the location of the store has become the first common failure in the whole process of installing lithium battery solar street lamps. At the installation site, first check whether there are any obstructions and roadblocks near the subgrade, no multi-storey buildings with flowers, trees and other roadblocks that can affect the direct light source, and no installation is allowed in the backlit area.

2. Part of subgrade of lithium battery solar street lamp

The size and firm level of lithium battery solar street lamp subgrade. Whether the stability of the subgrade will immediately affect the safety performance of the street lamps, so the subgrade should strictly follow the specific operation of the engineering drawings as far as possible, and try to grasp the specifications, models, dimensions, materials and other important data statistics. The color of farmland near the subgrade of lithium battery solar street lamp.

3. Part of wiring of lithium battery solar road lamps

During the whole wiring process of lithium battery solar street lamp, it is absolutely not allowed to have a connector inside the street lamp, and all electrode connection lines should be a detailed line as far as possible. Try to pay attention to small skills in the whole process of wire installation, and it is strictly prohibited to drag hard, to prevent the cable support from breaking or the cable sheath from splitting, causing power loss and other conditions.

4. Installation of solar street lamp pole

Before installing the solar street lamp pole, please remember to check all the power plugs once to see if there is any connection or disconnection. If there is, correct it as soon as possible. During the whole process of the column, try to give safety tips. During the whole process of tightening the anchor bolt, adjust the orientation of the street lamp and the ground leveling, and do not tilt back and forth, left and right, up and down. After the completion of all work, try to tighten the anchor line screws again, and do not move if they are too firm.