15-25M high-rod light manufacturers can generally be divided into lift and no lifts when producing high rod lights. The height of the main boom is generally more than 18 meters, and the electric lifting operation is convenient. After litting the lamp board to the working location, you can actively peel off the panel, slot, and line.

Advantages of high rod lights:

The lifting high rod lamp is equipped with manual and electric lifting control methods, so that the lamp plate descends safely and reliably to 2.5 meters away from the ground to facilitate the protection of operation. The leading line length of the handheld remote control device is 10 meters. The operator's lifting of the lamp plate at a distance of 5 meters can ensure the personal safety of the operator. The rolling high rod light is also equipped with a replacement line. When the lamp board drops to the low position, one end of the wire is drilled into the socket of the electrical control system, and the wiring box that is drilled into the lamp plate on the other end is directly powered by the lamp.

The benefits of high rod lights:

The sealing level of all rolling high rod lamps is IP65 international standards to prevent dust and rain from entering and ensure the service life of the bulb. The materials of the lamps are generally made of aluminum alloy plates and stainless steel, which has good corrosion resistance.

Middle rod lamp: According to the shape shape determined by the bidder and the structural parameters of the manufacturer, the structure and proportion of the basic structure is calculated based on the seismic 7 and the 12 levels of wind resistance;

High rod lamp: The light rod is used in a plug -in, each section is formed once, and the insertion length is not less than 500mm. After inserting the rod, the gap should not be greater than 3mm, and it is equipped with a reliable limit device and a solid device.

Medium Extreme Lights: Generally, it means that there is no source of heavy equipment, and the scope of small lighting is inserted. The light source is generally below 6 meters, and the height is generally about 9-18 meters. The compensation problem is the middle rod light.

High rod lights: can be lifted and lowered, and there is no lift function.