The general structure of garden column lamp is composed of lamp holder, landscape lamp pole and lamp holder. The proportion of these three parts, harmonious color and originality also reflect the beautiful shape of landscape lights. In the past, the lines were generally more complex and detailed, but now they emphasize simplicity, atmosphere, overall beauty and harmony with the environment.

Lamp holder. The lower edge of the landscape lamp box is connected to the base of the garden lamp. Underground cables generally cross the foundation to reach the junction box of the lamp box, and then rise along the lamp post to the lamp cap. For a lampholder, it is generally necessary to keep 20 × 15cm junction box, so the cross section of the lamp holder is generally thicker, because it is close to the road surface, and the shape needs to be more stable.

Street lamps. At the upper end of the pole, various materials can be selected, such as reinforced concrete, cast iron pipe, steel pipe, stainless steel, glass fiber reinforced plastic, etc. When the wire passes through the inside, the surface layer is produced and processed into various stitch patterns, some of which have different cross sections.

Lamp bracket. The lamp cap focuses on the appearance and color of the garden lamp. It has a lamp cap, multiple lamp caps, regular and natural shapes and various bulbs. During selection, attention shall be paid to the effectiveness of lighting, waterproof and dustproof, and the type and color of lamp cap shall conform to the overall design requirements.

The insiders of the landscape lamp factory feel that the street lamps have been changed from bilateral installation to unilateral installation. In order to ensure lighting, it is necessary to increase the height of the street lamp and extend the length of the lamp arm so that the street lamp can emit light on the whole road. When the height of the street lamp is constant, even if the density increases, the lamp will not light on the other side of the road due to height restrictions. Increasing the density of single side street lamps not only cannot ensure lighting, but on the contrary, it will make one side of the road too bright and the other side still very dark.