For high rod lights, when you see the name, you must know that it must be a longer pole. Usually, the light rod exceeds 15 meters, and the lights are made of steel, and the high -power lamp seat called a high -rod lamp is usually very high. Products produced by high -rod lamp manufacturers include lamps, extreme body, electrical parts, etc. Basic configuration requirements are usually as follows:

1. For the products produced by general high -rod lamp manufacturers, the lights can be conical lamp rods of eight, twelve and eighteen sides. Usually, they are cut, bending and welding production with high -quality steel plates. The height specifications can be 25 meters, 30 meters, 35 meters, 40 meters, etc. Its maximum wind resistance can reach 60 meters per second. The entire main body of the light rod is composed of plugs. The light rod should be equipped with a flangor steel chassis with a diameter of 1-1 or 2 meters and a thickness of 30-40 mm.

2. The general functional products are mainly based on the frame structure. The general decorative products are mainly steel pipes and steel pipes.

3. The product should be equipped with an electric lifting function system. The system is usually composed of motor, twisted, steel cables and cables. The motor is an electrical product. The wire rope must be dipped in galvanized, with a total of three groups. The system is usually installed inside the light rod, and its increase speed is usually three to five meters per minute.

4. The components used to improve the operation also include guiding arm and guide wheels. These components can ensure that the height of the bulb panel is not deviated, ensuring that it can be lifted in place and ensure that it falls and locks.

5. The lighting components used in the product are usually 400-100W white light, reflex mirror and reflective light. The number of lights used is usually within the range of 6-24 lights. Some lighting and all lighting can be controlled by the computer.

6. The product must be equipped with a lightning protection system, which is usually achieved by installing a 1.5 -meter lightning rod on the top of the lamp and a ground wire of 1 meter underground.

Generally, the products produced by high -rod light manufacturers include the above basic configuration, and this configuration also ensures that the product can be widely used in the squares, docks, stations, roads and other scenarios.