Some high -rod light products can be lifted and some cannot be lifted. So what is the principle of lifts of high rod lights that can be lifted? The high -rod light manufacturer made a brief introduction today.

Principles of high rod lights

1. In order to achieve the lifting function, high -rod lamp manufacturers will install electrical control and motor related systems on the light rod when they produce products. Installed on the vertical rod can prevent the damage to the system component of the environment and system component circuit, it is also equipped with various overload protection devices. These systems provide the power required for hanging.

2. The entire lifting system consists of a motor, a reducer, a shaft, a wire rope, a rope and a pulley. Motors, reducers, and courses are mainly used for drivers, while steel cables, semi -wires and pulleys are used to connect the lamp plate and the control driver, which can achieve effective control of the lamp board lifting.

Installation Precautions

1. Pay attention to preparation before installation, including checking components according to the list to ensure that the elements are complete. Each component requires a carefully check whether it is damaged, deformed, curved and distorted, and whether the galvanized layer of the component is complete. Each section of the rod is usually marked with its model, order number, number of sections and internal weights, and its correctness needs to be verified. According to the drawing information, please indicate in advance on the post for easy installation.

2. It should be noted that during the installation process, there is a certain error in the manufacturing of the product, so the data provided in the drawing is generally the maximum and minimum length of the shaft cover. During the installation process, lubricating oil is required to assist the installation. Be careful not to splash lubricating oil during use, causing rod pollution. Of course, you can also use soapy water instead of lubricating oil.

Although the products produced by high -rod light manufacturers are generally high rod lights, they will be named according to different use occasions in practical applications. Depending on the application occasions, the names to be called in front of the name of high rod lamps are usually added.