The honeycomb radiator and current controller installation box of LED street lights. Close the bottom end of the heat sink at the central part. The installation platform is fixed with LED chips. The LED chip has a lens on the outer cover of the LED chip. Essence The side wall guidance between the heat sinks in the middle of the honeycomb radiator forms multiple drainage channels, and the two ends of the drainage channel extend to the outside of the installation platform, respectively. The lower end of the honeycomb radiator is fixed with a lamp shell. Using a hollow honeycomb structure, the air can form air convection on the upper and lower end of the radiator, adding its strength and heat dissipation area. At the same time, the surface surface of the radiator is set with drainage channels to automatically discharge rainwater. Compared with other heat sink, the same heat dissipation area consumes less materials, has higher strength, and sets up drainage lines to solve the problem of dust accumulation.

     High -power LED works for a long time at a suitable temperature, so that the brightness of the LED chip will not decrease due to overheating. Ultra -power LED honeycomb radiator can be used for various LED lighting sources, which can improve the heat dissipation effect to 60%, thereby better to achieve good economic and social benefits of LED energy saving, low calories, and non -pollution.

     The honeycomb radiator is composed of a grid -shaped hollow heat sink formed by a die -casting form. The central part of the lower end of the honeycomb radiator is equipped with a installation table. The LED chip, the outer lens of the LED chip, is characterized by the cross section of the heat sink is hexagonal, and the inner wall of the heat sink is equipped with enhanced tendons.

     The honeycomb radiator is composed of a number of medium air heat sinks discharged by multiple grids. The honeycomb radiator is fixed with a current controller installation box on the side wall. The platform is closed at the bottom of the heat sink in the middle. The installation platform is fixed with LED chips. The LED chip cover has a lens. Goll.