High pole lamps can be called "tall" road lamps. These words are not exaggerated, but they are reasonable. First of all, the appearance of high pole lamps is tall and straight, and the design of lamp caps is colorful and original. The places where high pole lamps are required to be installed are all large, medium and wide urban squares or scenic spots.

When talking about the high pole lamp, the first thing that people think of is its expensive price. There is no mistake that the high pole lamp is really expensive, indeed not ordinary expensive. Friends who buy the high pole lamp should understand that even the cheapest high pole lamp, its price will not be less than 28000 yuan. What factors determine the high price of the high pole lamp? Next, let's make a systematic analysis to remove doubts.

Due to the interference of its own height, the wall thickness of the high pole lamp should be at least 6mm, which is different from the ordinary small street lamp pole. Any submerged arc machine with a wall thickness of 2.75mm can firmly weld the weld. Whether half of the rods with a thickness of more than 6mm are rolled or welded, there is a high requirement. In order to avoid the welding seam cracking caused by the weight of the lamp holder and wind interference of the rod, generally, the high pole lamps are all reinforced by double-layer submerged arc in the surface and inside. That is to say, whether in the application of consumables or the power consumption of mechanical equipment, the production and manufacturing costs of high pole lamps are much higher than those of ordinary road lamps.

The second is its unique basic function of active lifting, which will play a very important role in the repair and protection of light sources in the later period. Many businesses will generally configure low-quality fake light sources for high pole lamps in order to seek explosive profits, with major repairs every three to five months and minor repairs every ten and a half days. If there is no lifting system for high pole lamps, it is guaranteed that the cost of repairing machinery and equipment in this year will be several times higher than that of the lifting system.

There is also the modeling design of lamp caps. The modeling design of lamp caps of high pole lamps is in a variety of forms, but it is always the same. It is divided into two important categories, namely frame structure and modeling design structure. Literally, the frame structure is a steel frame structure. There is no special modeling design, but simply steel pipe welding. This type of lamp caps are relatively simple in processing, but the ones with modeling design are completely different, For example, we often see the "flying saucer lamp" on the roadside. Before production and manufacturing, such high pole lamps with special modeling design shall first be planned with the help of planners, and then special shaped materials shall be cut according to the planned drawings, and then assembled and welded.