The main pole of the high-pole light with a height of more than 20 meters usually uses a steel plate with a wall thickness of 5.6 mm as the main material. After the pole is rolled up, the joint is welded, and the firmness of the welded part is not inferior to that of the whole board. After the high pole lamp is welded as a whole, the inner and outer layers need to be hot-dip galvanized. A qualified galvanizing process can ensure that the main rod will not rust within 15 years. Of course, an unqualified galvanizing process cannot achieve this effect, but after all, the steel wall thickness is more than 5mm, even if it is rusted for ten or twenty years, it will not rust. It is very powerful, so the main pole of the high pole lamp produced by the high pole lamp manufacturer will not break at all, unless you plan to change the shape and replace it.

The lifting system is the core part of the high pole light, and the lifting action of the light board is completely dependent on the lifting system. The lifting system of the high pole light is mainly composed of a winch and a wire rope. It can be said that if the wire rope is continuous, the hoist will not break for decades. Why do you say that? First, the hoist is installed in the main pole, and the line will not be aged without the wind and the rain. Secondly, the winch is rarely started. If the light source of the lamp head is not broken for 10 years, it will not be moved for ten years. So it is very difficult to break the lifting system. The role of the pole panel is to load the light source, and the shapes are very diverse, but they are all the same. No matter what it looks like, it is done by bending and welding, and the firmness is indestructible. The 400-watt high-pressure sodium lamp assembled by a dozen or twenty lamps is at most a large horse-drawn cart. Whether it is an LED lamp holder or a high-pressure sodium lamp, it is an electronic product. For any layman, electronic products only know what they are and do not know why. Whether this kind of thing is good or bad can't be seen from the surface. The light source is the main symbol of the whole set of high pole lights, because high pole lights are street lights, and the function of street lights is to illuminate. If the light source is broken, it means that the high pole light is broken, so the choice of light source quality is particularly important.

The characteristics of high pole lamps produced by high pole lamp manufacturers are mainly highlighted in "high". People often say, stand tall and see far. The same is true for high-pole lights, but a small modification to this sentence is needed, that is, "grow taller, shine farther". Height is a beauty point of high pole lights, so the advantages are more appropriate than the beauty points, because the advantage of height can maximize the illumination area of the top light source, so as to achieve a very ideal lighting effect.