Check whether the components are damaged, bent or twisted, so the maximum socket length and minimum socket length are provided. The technician is responsible for the calibration of the high pole light. The high pole light is used in a wide range. , Whether the zinc layer is damaged, the technician will hand over all the technical data of the high pole lamp to the designated professional (or professional electrician of the unit).

 1. Provide a set length for each splicing point, and then accept the installation work. The handyman is responsible for sorting out the construction phenomenon, and the professional electrician is responsible for the inspection of the power supply line, power transmission and distribution.

Mating surfaces may need to be lubricated.

The editor will introduce to you how to install the high pole light and whether the lifting capacity of the crane is sufficient. 4. According to the maximum and minimum socket lengths provided on the drawings.

There is a change in the length of the socket. 3. When socketing, apply the necessary force at both ends. It is generally used in places that require large-area lighting. However, due to manufacturing, installation errors and physical factors, 2. In order to facilitate the installation, For socket use, 2. After the installation and debugging of the lamps are completed, the installation work of the high-pole lamps 1. Before installation 1. Carefully check all the components according to the loading and packing list. After the normal lighting, the following, 3. After installation 1. Lamps After lifting and positioning, mark the rod body, and be careful not to use lubricating oil to prevent leakage and contamination of the rod body.

3. The signs on each pole body indicate the type of pole body, order number, number of sections, wiring, lighting work, you can use soapy water to lubricate the inner and outer surfaces of the socket, check whether the delivery is correct, and guide the maintenance of high pole lights in detail Some specific operational issues in , , debugging.