Taking solar panels as an example, the ancestors of the solar panel should be checked during maintenance. There are no branches, leaves, or other foreign objects directly obstructed. Whether it is in the shadow area of other objects, whether there are cracks, ash, and dirty lights on the surface. Whether the single is cracking and whether the connection is flat is the scope of the inspection. In the LED street light use system, battery is the biggest difficulty in maintenance, because the current service life of normal batteries is 2 to 3 years. In its life cycle, it is necessary to check the charging and discharge of the battery frequently. There are places where corrosion or contact. These are the main maintenance of LEDs.

The sealing of the lamp head must pass the level. The waterproof treatment of the lamp head can ensure the service life of the street lights. Therefore, the choice of the shell of the street light is very important. When choosing, you must pay attention to whether the style has waterproof performance. For the controller, it is generally placed inside the road when installing, so as to better avoid the wind and sun. It is necessary to have a certain degree of waterproof performance. The installation of the battery is to bury the battery under the ground, about 40 cm, thereby avoiding water flooding. Finally, the LED street light head should be tested to see if the street lights are normally turned on. If the lights are turned on, it can be used normally. If it cannot be replaced, it needs to be replaced.