When installing LED high-power street lights, it is recommended to use guide sleeves for positioning.

2. Be sure not to install LED high-power street lights with deformed pins.

3. When deciding to install in the hole, calculate the hole spacing size and tolerance on the face and circuit board to avoid excessive pressure on the bracket.

4. Before the welding temperature returns to normal, it is necessary to avoid any vibration or external force on the LED.

5. Pay attention to the arrangement of external wires of various devices to prevent incorrect polarity installation. The device should not be too close to the heating element, and the working conditions should not exceed its specified limits.

Special care must be taken when cleaning colloids with chemicals, as some chemicals can damage the surface of the colloids and cause discoloration, such as trichloroethylene, acetone, etc. Wipe and soak with ethanol for no more than 3 minutes at room temperature.