n the process of installing LED street lights, the standard installation method is the premise to ensure our correct use. Below we, Juyuan Lighting, will introduce you to the specifications that need to be paid attention to for the correct installation of LED street lights.

First of all, the installation height (from the light source to the ground), elevation angle, and installation direction of the LED street lights on the same road should be consistent. The excavation size of the foundation pit should meet the design requirements, the strength level of the foundation concrete should not be lower than C20, and the cable protection pipe in the foundation should pass through the center of the foundation and exceed the foundation plane by 30-50mm. Before pouring the reinforced concrete foundation, the accumulated water in the pit must be removed. Metal components such as lamp poles, lamp arms, hoops, bolts, and pressure plates used in the installation of led street lamps should be hot-dip galvanized, and the anti-corrosion quality should comply with the relevant provisions of the current national standards.

The longitudinal center line of the LED lamp installation and the longitudinal center line of the lamp arm should be consistent, the horizontal horizontal line of the lamp should be parallel to the ground, and there should be no inclination after tightening. The led lamp head is fixed firmly, the adjustable lamp head should be adjusted to the correct position according to the design, and the lamp head wiring should meet the regulations. There should be no joints in the threading of the lamp arm, lamp panel and lamp pole of the led street lamp, and the threading hole or nozzle should be smooth, free of burrs, and