Technical parameter configuration of 15m-40m high pole lights on the market:

1. High-pole light pole: The high-pole light manufacturer plans to produce a height of 15-40 meters. The light pole is an eight-edge, twelve-edge, and eighteen-pyramid-shaped pole, which is made in 3 sections. The thickness of the board from top to bottom is : 6mm, 8mm, 10mm, upper diameter: 280mm, lower diameter: 560mm, it is made of high-strength and high-quality steel plate by cutting, bending and automatic welding. The planned wind resistance can reach 60 m/s. It can be equipped with high-quality steel plate flange with a diameter of 950mm and a plate thickness of 25mm.

2. The main pole and bracket of the high-pole light are made of high-strength and high-quality steel plate, which is formed by one-time rolling of a large bending machine, and is formed by active submerged arc welding. , can guarantee the surface corrosion-free for 30 years.

3. There are two types of high pole lights: up-down type and non-up and down type. Raised pole lights are generally used for high pole lights above 18 meters. The electric lifting and lowering operation is convenient. After the lamp panel is raised to the working position, the panel can be automatically removed, hung in the ditch, and the wire rope can be unloaded.

There are two ways of taking off and landing high pole lights, namely electric take-off and manual take-off and landing.

The electric landing system is composed of electric motor, winch, hot-dip galvanized steel wire rope and rubber cable. The light pole is installed in the body, and the lifting speed is 3 meters to 5 meters per minute.

Manual take-off and landing system, the length of the lead wire of the manual remote control device is 10 meters, we can manually control the rise and fall of the light panel at 5 meters, which can ensure our personal safety.

Shenzhen high pole lamp manufacturers

4. The guiding and unloading system of the high-pole light is composed of a guide wheel and a guide arm. In this way, it is possible to ensure that the light plate will not move laterally during the lifting process, and at the same time, when the light plate is raised to the position, the light plate can be moved. Actively fall off and locked by hook.

5. High