Cansun Lighting has nine years of lighting experience serving military enterprises. It is a high-tech enterprise integrating R&D, production and sales of LED outdoor high-power lighting fixtures, LED road tunnel lighting fixtures, and LED industrial lighting fixtures. The company is located in Baoan, Shenzhen. Fuyong Town, District, with a factory area of more than 5,000 square meters and more than 100 employees. The company's main products are led factory lights, led stadium lights, led tower chandeliers, led road tunnel lights, etc., which can provide customers with pre-sale, in-sale and after-sale solutions. Our products are widely used in outdoor lighting, urban road lighting, tunnel lighting, industrial plant lighting, large construction site dock lighting and other fields.

Requirements for factory lighting design standards of industrial lighting knowledge!

1. The choice of lighting method

1. For places with high illuminance requirements and low density of working positions, mixed lighting should be used in places where it is unreasonable to use general lighting alone.

2. When the illuminance requirements for the operation are not high, or when limited by the production technical conditions, it is not suitable to install local lighting, or when the use of mixed lighting is unreasonable, general lighting should be used alone.

3. When a certain work area needs to be higher than the general lighting illumination, the general lighting of the partition can be used.

4. When the general lighting of the partition cannot meet the illumination requirements, local lighting should be added.

5. Only local lighting should not be installed in the work area.

2. Illumination standard

The illuminance value of factory lighting design should be selected according to the provisions of the national standard GB50034-2004 "Architectural Lighting Design Standards". The illumination standards for more specific workplaces in various factories should also be in accordance with the regulations of the relevant industries.

3. Lighting quality

Lighting quality is a sign to measure the pros and cons of factory lighting design. It mainly includes the following:

1. Choose lamps with high efficiency and suitable light distribution curve. According to the hanging height of the lamps on the workshop frame, according to the room shape index ruler, the lamps with different light distribution are selected. When RI=0.5~0.8, narrow light distribution lamps should be used; when RI=0.8~1.65, medium light distribution lamps should be used; when RI=1.65~5, wide light distribution lamps should be used.

2. Select the lighting source with appropriate color temperature and color rendering index that meets the production requirements.

3. Reach the specified illuminance uniformity: the general illumination uniformity in the work area should not be less than 0.7, and the illumination uniformity around the work area should not be less than 0.5.

4. To meet the quality requirements of lighting direct glare limitation: Unified glare value (UGR) is in accordance with the provisions of GB50034-2004. That is, the general allowable value is 22, and the fine processing value is 19.

5. Take measures to reduce the influence of voltage fluctuation and voltage flicker on lighting and prevent stroboscopic effect.

6. The lighting device should work under the allowable working voltage.

4. Selection of industrial lighting sources

The light source should be selected according to the characteristics and requirements of the production process. The following places for factory lighting are suitable for using ceramic xenon lamps:

1. There are driving operations and places that need to avoid glare;

2. The lamp is used for a long time, and the electricity consumption is large, and it is necessary to save energy, save electricity and save money;

3. Places with strict requirements to prevent electromagnetic interference.

4. The lamp has a long service life, generally 5 years;

5. Places with high lighting requirements;

6. Places that need to strictly identify colors (such as spectral analysis rooms, chemical laboratories, etc.).