The LED street light keeps flashing, and the maintenance personnel need to first investigate whether the problem is with the driver power supply or LED light beads. The problem can be solved by replacing the driver power supply and light beads separately. If both are faulty, they need to be replaced together.

Sometimes there may be a malfunction where the street lights still flash after being turned off, which requires consideration of whether it is a problem with the wiring. It is possible that there is a problem with the zero line controlled by the switch, which needs to be dealt with in a timely manner to avoid accidents; If no problems are found after circuit inspection, it is very likely that the LED street light itself has generated self induced current. The problem can be solved by connecting the coil to the light in series with a relay.

What should I do when I see that the street light is broken? When street lights flicker or do not light up, ordinary citizens should provide feedback to relevant departments. So to what part should they report it to? This depends on the nature of the street lights:

There are two types of street light management in our country. One is socialized street lights, which account for a large proportion. If these street lights are broken, they should be reported for repair to the municipal department or the street light management office of the power bureau in the city where the State Grid is located. If the street lights are purchased and installed by the community, community, or rural area themselves, they are usually reported for maintenance to the property management or village committee. Another type of street light is the landscape light in scenic spots or parks. If this type of street light is broken, you can go to the tourist center in the park or scenic area to report the problem.