As one of the high -cost lamps, the renewal replacement is not so easy. If it is not broken, buy a new replacement directly, but use repeated repairs within the available range. Therefore, the daily protection of high rod lights is crucial, which can not only prevent excessive damage, but also extend the service life of high rod lights. Pay attention to its safety and protect it regularly.

Let ’s take a brief understanding of the 10 major protection matters of high rod lamps to see if all black metal components (including the inner wall of the lamp rod) of the high -rod lighting equipment (including the inner wall of the lamp) are hot -dip galvanized anticorrosive conditions, and the anti -loosening method of fasteners meet the requirements. View the straightness of the high rod lighting equipment (the latitude and weft meter must be used for measurement and testing regularly according to the requirements), and the rod agrees that the error should be less than 3 ‰ of the height of the rod. The straight line error of the light rod axis shall not be greater than 2 ‰ of the rod.

Check the mechanical strength of the lamplet to ensure the safe use of the lamplet. Regarding the closed lamp dish, check its heat dissipation. Check whether the outer and welds of the light rod are corroded. Regarding the long -term service period, it cannot be replaced from the beginning. If necessary, use ultrasonic and magnetic powder detection methods to detect and test the welds.

Check the fastener bolt of the lamp bracket to reasonably adjust the project direction of the lamp; carefully check the application of the wires (soft cables or soft lines) in the lamp plate, and see if the wires accept the excessive mechanical stress, whether there are aging, cracking, dew lines and other conditions. If the unsafe phenomenon should be processed immediately. Replace and repair the damaged light source appliances and other components