The new LED street lamp head, including the base of the bottom of the cooling shell before the cooling shell of the heat sink, is set with LED lamp plates on the outer surface of the heat dissipation lamp shell. There are several lenses on the transmittance board, which is set up at the bottom of the base, which includes the installation tube with an external cast iron layer set on the outer layer. The internal filling of the vibration reduction layer is filled with a sponge, which is embedded with several aluminum honeycomb rolls in the sponge. The inner steel mesh layer of the inside of the shock absorption layer is set with the inner steel plate layer on the inner side of the steel wire mesh.

     Advantage measures: LED light boards are set on the outer surface of the heat sink, the outer light of the LED lamp board is equipped with light transmittance board, a number of lenses are set on the light transmittance, the bottom of the base is equipped with a installation tube, the installation tube includes settings with settings On the outer cast iron layer on the outer layer, there is a vibration reduction layer on the inner side of the outer cast iron layer. The internal filling of the vibration layer has a sponge. There are several aluminum honeycomb rolls in the sponge. The inner steel plate is set on the inner side of the layer. The overall structure is simple and the design is reasonable. The entire lamp shell can be used for heat dissipation. There are also several heat dissipation holes on the heat dissipation light shell to make the heat dissipation effect better; the inside of the installation tube has a vibration reduction layer. In this way, the vibration resistance is used in use. Better, the use of lamps for a long time will not loosen, and the service life is longer.