Installing LED street lights is the first step to correctly use LED street lights. How to install LED street lights correctly? We need to pay attention to what precautions in use. Below we will introduce you to the relevant precautions description of LED street lights during installation.

First of all, at the same time, it is necessary to note that if you install the direction of the LED street light in the northern hemisphere, the solar panel is as good as possible to the south or the light surface to obtain the maximum energy. If in the southern hemisphere, the solar panels are as good as possible in the north or a better direction of light. According to the actual project needs, select the **** location for installation, and walk along the road to install solar street lights.

Then, in the process of digging the geology, the size of the size is determined according to the requirements. Before the infrastructure, you should first follow the local regulations and investigate the geological situation. If the surface is soft soil, the depth of the excavation should be deepened. In the process of pouring the LED street lamp base, after 2-4 days of solidification, the next step is performed. During the concrete solidification process, it is necessary to water and maintain it regularly. The concrete is completely solidified to install.

What are the precautions during installation?

1) Remove the packaging and check the accessories;

2) Take the external waterproof joint and test whether the lamp can work properly;

3) Tighten the back seat of the lamp on the appropriate height of the light rod.